Network Instruments GigaStor 114ff - Manual (Page 23)

Connecting Observer to the GigaStor
Chapter 2 Installing Your GigaStor
23
rev. 1
Figure 6 Edit Remote Probe Entry
4 Type the IP address that you assigned to the GigaStor in step 7 in
“Setting the GigaStor’s IP address” on page 19 and click OK. You
may leave the other fields blank. If you type a name, the name
will change after Observer connects to the remote probe. The
GigaStor appears in the list of probes available for redirection
(Figure 7).
Figure 7 Probe added to Remote Probe Administration and Redirection
5 Select the GigaStor probe and then click Redirect Selected Probe
(Figure 8).