National Instruments DAQCard-1200 - Manual (Page 79)

Appendix B Differences among the Lab-PC+, the DAQPad-1200, and the DAQCard-1200
DAQCard-1200 User Manual B-2 © National Instruments Corporation
The following table summarizes the differences among the three products.
Functionality Lab-PC+ DAQPad-1200 DAQCard-1200
Bus resource allocation Jumpers Software Software (automatic)
Calibration Potentiometers Software Software
DMA Uses DMA Cannot use DMA Cannot use DMA
Waveform generation Can do waveform
generation on one
DAC and
immediate updates
on the other DAC Can do waveform
generation on one
DAC and
immediate
updates on the
other Should do either
immediate update on both
or waveform generation
on both but not a
combination. See
Chapter 4,
Theory of
Operation , for more
information.
FIFO size 512 samples 1,024 samples 1,024 samples
Maximum single-channel
acquisition rate 83.3 K samples/s 100 K samples/s 100 K samples/s
Power-management modes — — 150 mA operating, 50 mA
power-down mode
Fuse Regular 250 mA Regular 250 mA Thermal 1.0 A