What you need to get started, Software programming choices – National Instruments DAQCard-1200 User Manual
Page 13
Chapter 1
Introduction
1-2
© National Instruments Corporation
with the PC, is a versatile, cost-effective and portable platform for
laboratory test, measurement, and control.
The DAQCard-1200 is shipped with NI-DAQ, a National Instruments
complete DAQ driver that handles every function listed on the data sheet for
our DAQ hardware. Using NI-DAQ, you can start your application quickly
and easily without having to program the card at the register level. Utilities
shipped with NI-DAQ also can help you conserve additional power by
configuring the DAQCard-1200 in the power-down mode. See Appendix C,
, for a description of the power-management
modes.
Detailed specifications of the DAQCard-1200 are in Appendix A,
.
What You Need to Get Started
To set up and use your DAQCard-1200, you will need the following items:
❑
DAQCard-1200
❑
DAQCard-1200 I/O cable
❑
DAQCard-1200 User Manual
❑
One of the following software packages and documentation:
–
LabVIEW for Macintosh
–
LabVIEW for Windows
–
LabWindows/CVI for Windows
–
NI-DAQ for Macintosh
–
NI-DAQ for PC compatibles
❑
Your computer
Software Programming Choices
There are several options to choose from when programming your National
Instruments plug-in DAQ and SCXI hardware. You can use LabVIEW,
LabWindows/CVI, or NI-DAQ.