National Instruments DAQCard-1200 - Manual (Page 16)

Chapter 1 Introduction
© National Instruments Corporation 1-5 DAQCard-1200 User Manual
Optional Equipment
You can use the following National Instruments products with your
DAQCard-1200:
• BNC-2081
• CB-50 or CB-50LP I/O connector block with a 0.5 or 1.0 m cable
• ER-8, ER-16 electromechanical relays
• PR50-50F or PR50-50M cables
• SC-2042, SC-2043 strain gauge and RTD accessories
• SCXI products
For more information about optional equipment available from National
Instruments, refer to your National Instruments catalog or call the office
nearest you.
Unpacking
The DAQCard-1200 is shipped in an antistatic vinyl envelope; when you
are not using the DAQCard-1200, store it in this envelope.
Because the DAQCard-1200 is enclosed in a fully shielded case, no
additional electrostatic precautions are necessary. However, for your own
safety and to protect the DAQCard-1200, never attempt to touch the pins of
the connectors.