Entering titles, ª entering titles – Panasonic DMR-E60 User Manual
Page 29
29
Entering titles
[SD/CARD] [RAM] [DVD-R]
You can:
≥Title discs with the DISC INFORMATION in the FUNCTIONS
window.
≥Title programmes with the Timer recording (page 25).
≥Title programmes with the DIRECT NAVIGATOR (page 33).
≥Title play lists with the PLAY LIST screen (page 39).
≥Title folders of still pictures (page 42).
Preparation
≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc with something recorded on it.
≥Select Titling “DISC INFORMATION”, Titling “Timer recording”,
Titling “DIRECT NAVIGATOR”, Titling “PLAY LIST”, or Titling
“JPEG” screen.
1
After the titling screen appears
Use [
3, 4, 2, 1] (10) to select the character you
want to enter and press [ENTER]
(10).
≥You can enter the following characters.
(1) This window shows the text you have entered (Title field).
(2) ERASE ([
;] (8))
(3) SET ([
∫] (7)) (when you have finished entering text)
(4) SPACE
To enter other characters
Repeat step 1.
2
Press [
∫] (7). (You can also finish entering the title
by using [
3, 4, 2, 1] (10) to select “SET” and
pressing [ENTER]
(10).)
≥The title is entered and the screen disappears.
ªTo stop partway through
Press [RETURN]
(28) (does not save any title information).
ª Entering titles
≥To enter characters
Use [
3, 4, 2, 1] (10) to select the character you want to
enter and press [ENTER]
(10).
≥To erase characters
Press [
;] (8). (You can also erase characters by using
[
3, 4, 2, 1] (10) to select “ERASE” and pressing [ENTER]
(10).)
≥To finish entering the title
Press [
∫] (7). (You can also finish entering the title by using
[
3, 4, 2, 1] (10) to select “SET” and pressing [ENTER]
(10).)
≥To enter a space
You may enter a space by pressing [-/--]
(4) and then press
[ENTER]
(10).
ªUsing the numeric buttons (4) to enter characters
e.g., entering the letter “R”
1) Press [7]
(4) to move to the 7th row.
2) Press [7]
(4) twice to highlight “R”.
3) Press [ENTER]
(10).
≥You may enter a space by pressing [-/--]
(4) and then [ENTER] (10).
ªTo correct a character
1) Use [
3, 4, 2, 1] (10) to select the character you want to
correct in the title field.
2) Press [
;] (8). (You can also erase characters by using
[
3, 4, 2, 1] (10) to select “ERASE” and pressing
[ENTER]
(10).)
3) Use [
3, 4, 2, 1] (10) to select the correct character and
press [ENTER]
(10).
Note
≥You cannot enter titles if the programme is protected. Release
the protection with the direct navigator (page 34).
≥You cannot enter titles unless the “Disc Protection” in DISC
INFORMATION is “Off” (page 30).
≥You cannot enter titles if the disc is protected with the write
protect tab (page 65).
≥If you enter a long title, only part of it is shown in the programme
list (page 32) and play list screen (page 35).
≥Still picture folder titles
-Titles are saved in the “TITLE.DVD” folder and can only be
displayed on this unit.
-Input is not possible if the destination lacks sufficient space or
has exceeded the maximum number of allowable files.
-The title may not appear correctly if input was done using
other equipment.
_
Enter Title
1
2
3
4
5
6
7
8
9
0
-/--
SET
0
-/--
–
ERASE
1
2
3
4
5
A
B
C
a
D
E
F
d
G
H
I
N
O
g
J
K
L
j
M
m
6
7
8
9
0
b
c
i j £
e
f
/
l %
h
i
fl $ &
k
l
O N @
n
]
_
o
[
SPACE
P
Q
R
S
p
T
U
V
t
W
X
Y
Z
w
q
r
s
(
)
u
v
{
}
-
x
y
z
^
~
!
?
\
.
,
"
'
:
;
|
RETURN
ENTER
SELECT
(1)
(2)
(3)
(4)
ENTER
PAUSE
ENTER
STOP
ENTER
1
2
3
7
8
9
0
-/- -
4
5
6
ENTER
5
6
7
8
N
O
J
K
L
M
P
Q
R
S
T
U
V
7
7
7