Panasonic DMR-E60 - Manual (Page 28)

28
Recording from a video cassette player
When connected to non-DV equipment
[RAM] [DVD-R]
You can record audio and video being played on a video cassette
player or a video camera connected to the input terminals.
Preparation
≥Before connecting any cables, first make sure that the power for
both units is off.
Then after connecting any cable, turn on the both units.
≥Connect the other equipment to this unit’s input terminals
(page 52).
≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP or EP (page 20).
≥It is also possible to perform the flexible recording (FR)
(page 21).
1 While stopped
Press [ W, X, CH] (23) or [INPUT SELECT] (22) to
select the input channel for the equipment you have
connected.
≥Select AV1, AV2, or AV3.
2 Start play on the other equipment.
3 Press [ ¥, REC] (31) at the point you want to start
recording.
When connected to DV equipment
[RAM] [DVD-R]
You can record audio and video being played on a DV equipment
connected to the DV input terminal.
Preparation
≥Before connecting any cables, first make sure that the power for
both units is off.
Then after connecting any cable, turn on the both units.
≥Connect the other equipment to this unit’s input terminals
(page 52).
≥Use a DV cable to connect the equipment.
≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP or EP (page 20).
≥It is also possible to perform the flexible recording (FR)
(page 21).
1 While stopped
Press [ W, X, CH] (23) or [INPUT SELECT] (22) to
select the input channel for the equipment you have
connected.
≥Select DV.
2 Start play on the other equipment.
3 Press [ ¥, REC] (31) at the point you want to start
recording.
Audio Mode for DV Input
Stereo 1:
Records sound (L1, R1) when DV recording is taking place.
Stereo 2:
Records added sound such as narration (L2, R2) subsequent to
original recording.
Mix:
Records both Stereo 1 and Stereo 2.
≥L1+L2 are recorded in L and R1+R2 are recorded in R. In the
case of bilingual broadcast, Stereo 1 is recorded when recording
to DVD-R or if recording in LPCM. Details of recording are given
in “Bilingual Audio Selection” (page 55).
ªTo skip unwanted parts
Press [ ;] (8) to pause recording.
Press again to restart recording.
ªTo stop recording
Press [ ∫] (7).
Note
≥Stop play on the other equipment as well.
For your reference
≥Poor video quality or colouring may indicate that the material you
are recording has copy protection.
≥Select the TV system (PAL/NTSC) of the programme you wish to
record (page 56).
≥Any software that has been so treated cannot be recorded using
this unit.