Panasonic DMR-E60 - Manual (Page 25)

25
Timer recording
Using G -CODE number to make timer
recording
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme’s G
-CODE number, which
can be found in the television sections of newspapers or in
television guides. You can programme up to 16 programmes one
month in advance. Programmes for everyday or every week are
counted as one programme.
Preparation
≥Switch [DVD, TV] (19) to “DVD”.
≥Ensure that this unit’s clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
1 Press [G-Code] (2) button.
2 Press the numeric buttons (4) to enter the G-
CODE
number.
≥If you enter the wrong digit, use [2] (10) to move back and
enter the correct digit.
3 Press [ENTER] (10).
≥The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
≥Check the programme.
To programme other recordings, repeat steps 1, 2 and 3.
4 If the programme is correct
Press [ENTER] (10).
≥The Timer Programme List screen appears.
5 Press [RETURN] (28).
ªTo put the unit on recording standby
Press [ , TIMER] (14).
Ensure “ ” lights on the unit’s display.
ªTo change the programme
Timer Programme Correction screen (After step 3 at left)
1) Use [
2, 1] (10) to select the item you want to change.
2) Change the setting with [ 3, 4] (10).
≥You may use the numeric buttons (4) to enter “Name”,
“Date”, “Start” and “Stop”.
The items change as follows:
≥Name (Programme Position/TV Station Name)
≥Date
Current date >the day before one month later>
Daily (Sunday to Saturday) >Daily (Monday to Saturday)>
Daily (Monday to Friday) >Weekly (Sundays)>…>
Weekly (Saturdays)
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥Mode (Recording mode)
XP >SP>LP>EP>FR (page 20)
≥Title
Select “Title” and press [ENTER] (10), then refer to page 29
for entering title.
You can give DVD-RAM and DVD-R titles of up to 44
characters.
3) Press [ENTER] (10) when you have finished making changes.
The Timer Programme List screen appears.
RETURN
No.
0:59 SP G-Code Remain
12:53:00 16.7. TUE
-- 0 9
Enter G-Code Number by using 0-9 keys.
RETURN
No.
0:59 SP G-Code Remain
12:53:00 15.7. TUE
-- 0 9
1 1 1 1 1 1 1 1 1
RETURN
CANCEL SELECT
2:00 1:00 15/ 7 TUE
Mode Stop Start Name Date
1:58 SP TIMER
RECORDING Remain
12:53:00 15.7. TUE
ENTER
SP
Press ENTER to store new programme.
64 ABC
Title
No.
-- 0 9
RETURN
SELECT
SP OK 1:22 1:19 64 ABC 15/ 7 TUE 01
Mode Disc space Stop Start No. Name Date
1:58 SP
TIMER
RECORDING
Remain
1:19:00 15.7. TUE
ENTER
New Timer Programme
CANCEL
SELECT
2:00 1:00 15/ 7 TUE
Mode Stop Start Name Date
1:58 SP TIMER
RECORDING Remain
1:19:00 15.7. TUE
ENTER
SP
RETURN
Press ENTER to store new programme.
CANCEL
64 ABC
Title
No.
-- 0 9