Paradyne 3162 DSU/CSU - Manual (Page 99)

Configuration Options
C-11 3162-A2-GB20-30 March 1999
Cross Connect Configuration Options
The Cross Connect configuration options are divided into two tables as follows:
H DTE-to-Network Assignment Options (Table C-4)
H
Sync Data Port Assignment Options ( Table C-5 )
DTE-to-Network Assignment Options
Table C-4. DTE-to-Network Assignment Options
DTE to Network Assignments
N01 N02 N03 N04 N05 N06 N07 N08 N24
DTE01 DTE02 DTE03 DTE04 DTE05 DTE06 DTE07 DTE08 DTE24
Assigns DS0 channels from the DTE Drop/Insert (DSX-1) interface to the network
interface.
Line 1 displays the 24 channels for the network interface. Line 2 displays what is
allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:
Value Meaning
Available This DS0 channel is not allocated. You can modify this value on this
screen.
Assigned This DS0 channel is allocated to a synchronous data port. You
cannot modify this value on this screen.
DTE nn This DS0 channel is allocated to the DTE Drop/Insert (DSX-1)
interface DS0 channel
nn, where nn is a number from 01 to 24. You
can modify this value on this screen.