Paradyne 3162 DSU/CSU - Manual (Page 187)

Index
IN-3 3162-A2-GB20-30 March 1999
L
lamp test, 4-24
LAN Adapter, 1-2, 1-4, 2-3, 2-4, 3-17, F-1
LEDs, front panel
during power-up self-test, 2-6
functional description, 3-1
lamp test, 4-24
physical description, 1-3
line coding, C-4
line equalization, C-4
line loopback (LLB), 4-17
link layer protocol, 3-16, 3-19
link trap, 4-9
LOF (Loss Of Frame) condition, 3-2, 3-3
LOFC (Loss Of Frame Count) report, 4-6
loopback
front panel LED indication, 3-2
local, 4-16
abort, 4-21
data channel loopback (DCLB), 4-20
data terminal loopback (DTLB), 4-21
DTE loopback (DLB), 4-18, C-5, D-3
line loopback (LLB), 4-17
payload loopback (PLB), 4-18
repeater loopback (RLB), 4-19
remote, 4-15
LOS (Loss Of Signal) condition
ASCII terminal/printer message, 4-8
Device Health and Status message, 4-3
front panel LED indication, 3-2, 3-3
Performance Report message, 4-7
Self-Test Health message, 4-2
troubleshooting, 4-11
M
maintenance
device health and status, 4-3
performance reporting, 4-4
power-up self-test, 2-6, 4-1
manager, SNMP, 1-2
menu tree, 3-7
messages
alarm
Device Health and Status, 4-3
Performance Report, 4-5
Self-Test Results, 4-2
troubleshooting, 4-11
with ASCII terminal/printer, 1-2, 4-8
status
Device Health and Status, 4-3
Performance Report, 4-5
Self-Test Results, 4-2
Test Status, 4-25
MIBs, SNMP. See SNMP, MIBs
N
network interface
cabling example, 2-5
channel allocation procedure, 3-20
configuration options, C-2
failure message, 4-2
front panel LED indications, 3-2
functional description, 1-4, 2-1
physical description, 1-3
pin assignments, D-1
technical specifications, B-1
troubleshooting, 4-11
O
objects, SNMP, 1-2, E-1– E-24
OOF (Out Of Frame) condition
ASCII terminal/printer message, 4-8
Device Health and Status message, 4-3
front panel LED indication, 3-2, 3-3
Performance Report message, 4-5
troubleshooting, 4-11
options, strap. See configuration options