Paradyne 3162 DSU/CSU - Manual (Page 188)

Index
IN-4 3162-A2-GB20-30 March 1999
P
pattern tests, 4-22
payload loopback (PLB), 4-18
PBX applications, 2-2
PDV (Pulse Density Violation) condition, 3-3
performance reporting, 4-4, C-9
physical description of DSU/CSU, 1-3, B-2
pin assignments, D-1– D-14
Point-to-Point Protocol (PPP)
procedure for configuring, 3-19
used with SNMP system, 1-2, 2-3, 2-4, 3-17, F-1
PORT (1– 2) interface
configuration options, C-6
failure message, 4-2
front panel LED indications, 3-4
functional description, 1-4, 2-1
managed by SNMP, E-1
physical description, 1-3
pin assignments, D-7
technical specifications, B-2
power input
cabling example, 2-5
connector, 1-3, 1-4
consumption, B-1
requirement, B-1
troubleshooting, 4-11
power module, 1-4, B-1
power-up self-test
displaying results, 4-1
front panel indications, 2-6, 3-2
troubleshooting, 4-11
problem determination. See troubleshooting
protocol, link layer, 3-16, 3-19
Q
QRSS Test, 4-22
R
rate
auxiliary port, C-23
communications port, C-18
external clock, C-16
synchronous data port, C-13
rear panel
connectors. See connectors, rear panel
physical description, 1-3
recover, asynchronous terminal operation, 3-6
remote loopback, 4-15
repeater loopback (RLB), 4-19
reset
asynchronous terminal operation, 3-6
front panel indications, 2-6
router applications, 2-1, 2-2
RS-449 interface, D-9
S
self-test
displaying results, 4-1
front panel indications, 2-6, 3-2
troubleshooting, 4-11
Send Ones configuration option, C-5, C-8
serial crossover cable, D-13
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-19
used with SNMP system, 1-2, 2-3, 3-17, F-1
SES (Severely Errored Seconds) report, 4-6
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-16
option table, C-26
option worksheet, C-43
connection examples, 2-3, 2-5, F-1
database, 1-2
IP addressing, F-1
manager, 1-2
MIBs
functional description, E-1
list of objects, E-1– E-24
objects, 1-2
principles of operation, 1-2
traps, functional description, 1-2, 4-9
specifications, environmental, B-1, B-2
status messages. See messages, status
straps. See configuration options
subnet, 3-16, C-26, C-27, C-28, F-1
synchronous data port. See PORT (1–2) interface