Procedure – Paradyne 3162 DSU/CSU User Manual

Page 49

Operation

3-25

3162-A2-GB20-30

March 1999

Procedure

To display the DS0 channel allocation:

1. From the Main Menu screen, select Configuration.

2. From the Load Configuration From screen, select Current.

3. From the Configuration Edit/Display screen, select Cross Connect.

4. From the Cross Connect screen, select DTE To Network Assignments.

The DTE to Network Assignments screen appears (Figure 3-13).

5. To view specific port assignments on the Network Channel Display screen,

select NetChan at the bottom of the DTE to Network Assignments screen.

ООООООООООООООООООООООООО

main /config/cross_connect/dte

Customer ID: Node A

Model: 3162

Slot: xx

DTE (DSX-1) TO NETWORK ASSIGNMENTS

N01 N02 N03 N04 N05 N06 N07 N08

DTE01 DTE02 DTE03 DTE04 DTE05 Available Available Available

N09 N10 N11 N12 N13 N14 N15 N16

DTE09 DTE10 DTE11 DTE12 DTE15 Assigned Assigned Assigned

N17 N18 N19 N20 N21 N22 N23 N24

Available Assigned Assigned Assigned Assigned Assigned Assigned Available

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save NetChan DTEChan PtAssign

NetChan
Selection

Figure 3-13.

Example of DTE Drop/Insert Interface Worksheet