Paradyne 3162 DSU/CSU User Manual

Page 50

Operation

3-26

3162-A2-GB20-30

March 1999

Allocating DS0 Channels from the DTE Drop/Insert Interface to the
Network Interface

Procedure

To allocate DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface:

1. From the Main Menu screen, select Configuration.

The Load Configuration From screen appears.

2. From the Load Configuration From screen, select Current.

The Configuration Edit/Display screen appears.

3. From the Configuration Edit/Display screen, select Cross Connect.

The Cross Connect screen appears.

4. From the Cross Connect screen, select DTE To Network Assignments.

The DTE to Network Assignments screen appears

(Figure 3-14).

(DSX-1) DS0 channel 01 is assigned to the network DS0 channel 01.

6. Select Save to store these settings in nonvolatile memory.

ООООООООООООООООООООООООО

main /config/cross_connect/dte

Customer ID: Node A

Model: 3162

Slot: xx

DTE (DSX-1) TO NETWORK ASSIGNMENTS

N01 N02 N03 N04 N05 N06 N07 N08

DTE01 Available Available Available Available Available Available Available

N09 N10 N11 N12 N13 N14 N15 N16

Available Available Available Available Available Assigned Assigned Assigned

N17 N18 N19 N20 N21 N22 N23 N24

Available Assigned Assigned Assigned Assigned Assigned Assigned Available

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save NetChan DTEChan PtAssign

DTE to
Network
Assignment

Figure 3-14.

Making DTE to Network Assignments