Pitney Bowes 1630 - Manual (Page 33)

S Y S T E M S E T U P 4 - 1
Getting Started
Setting Dialing Mode (Tone/Pulse)
Your machine comes set to accommodate tone (multi-frequency) dialing
service. If you have pulse (rotary) dialing service, you need to change the
dialing mode.
1 Press Features , 1 , 1 , 1 .
2 Use or to select dialing mode
D I A L I N G : T O N E ?
S E L E C T <- -> & S E T and press Enter/Yes .
D I A L I N G : P U L S E ?
S E L E C T <- -> & S E T
3 Press Stop to exit.
Setting Date and Time
Your machine displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time.
All other settings remain unaffected.
1 Press Features , 1 , 1 , 2 .
2 Enter the last two digits of the year and Y E A R : X X
E N T E R & S E T press Enter/Yes .
3 Enter two digits for the month and press Enter/Yes .
M O N T H : X X
E N T E R & S E T (For example, enter 09 for
September, or 10 for October).
4 Enter two digits for the day and press Enter/Yes . D A Y : X X
E N T E R & S E T (For example, 06).
5 Enter the time in 24-hour format and press
T I M E : X X : X X
E N T E R & S E T
Enter/Yes . (For example, enter 15:25 for 3:25
PM).
6 Press Stop .
The screen now displays the date and time you set, and displays it
whenever the machine is standing by.
4 4
System Setup