Pitney Bowes 1630 - Manual (Page 103)

14 - 7 U S I N G F A X M A C H I N E A S A P R I N T E R
Printing the Internal Font List
You can print a list of the machine’s internal (or resident) fonts to see how
each font looks before you select it.
1 Press Features , 2 , 1 , 1 .
2 Press Send/Receive . The machine prints the list.
3 Press Stop to exit.
Printing the Print Configuration List
You can print a list of current printer settings.
1 Press Features , 2 , 1 , 2 .
2 Press Send/Receive . The machine prints the settings.
3 Press Stop to exit.
Restoring Factory Default Settings
You can return the machine to original factory settings. Permanent fonts
are restored, but macros are cleared.
1 Press Features , 2 , 2 , 1 .
2 Press 1 to restore the factory settings
1 . R E S E T 2 . E X I T
—OR—Press 2 to exit without making
a change.
3 Press Stop to exit.
Printing PC Data in Hexadecimal
You can print data as hexadecimal values to check data errors and
problems. If you select HEX DUMP MODE, all PC data is printed
hexadecimal. To turn hexidecimal mode off, press
Shift and Clear/No at the
same time.
1 Press Features , 2 , 2 , 2 .
2 Press 1 to set PC to hexidecimal mode
1 . S E T 2 . E X I T
—OR—Press 2 to exit without
making a change.
3 Press Stop to exit.