Panasonic KX-HGW600 - Manual (Page 78)

Operating Instructions
78
Access Control
Access Control window allows you to control the access to the Camera Portal page
from the WAN side of the KX-HGW600.
This setting is not for the access control to the Setup Page or Recording/Playback page.
1.
Click [Access Control] on the Camera Setup window.
2. Check None, Administrator Only or Restricted Access.
• When you check Administrator Only, the following window appears.
Enter the user name and password to access the Camera Portal page.
3. When you have finished, click [Save]. The setting will be saved.
4. Click [Restart Now!].
When you check Administrator Only, the authentication window appears. Enter
the registered user name and password and click [OK].