Set u p, Setting up your network camera manually – Panasonic KX-HGW600 User Manual
Page 35
Operating Instructions
[For assistance, please call: 1-800-272-7033]
35
Set
u
p
2.
Turn on the Network Camera.
3.
Push CLEAR SETTING button on the Network Camera.
The Network Camera starts to communicate with the KX-HGW600 that control
transmission paths on the network. After that, the Network Camera screen is
registered on the Camera Portal page.
•
The Automatic Setup function automatically configures the following network
settings.
•
The Automatic Setup function assigns each port number and IP address in
the following order.
Setting up your Network Camera manually
•
To set up your Network Camera manually, please refer to Page 75.
•
To set up the specific Network Camera manually, clear Enable check box on the
Network window of Network Camera ([Network]
1. Network Configuration
from the Setup Program). For more information, please refer to the Network
Camera’s manual.
KX-HGW600
Port Forwarding
Camera Entry
Screen Assignment
Network Camera
Port No.
IP Address
Subnet Mask
Default Gateway
DNS Server Address
Camera Name
Port No.
IP Address
Cam 01
Cam 02
Cam 03
•
•
•
Cam 16
60001
60002
60003
•
•
•
60016
192.168.0.113
192.168.0.114
192.168.0.115
•
•
•
192.168.0.128