Panasonic KX-HGW600 - Manual (Page 75)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
S
ystem
Featur
es
To set up your Network Camera manually
To set up your Network Camera manually, follow the steps below.
1.
Check Do Not Use in the Automatic Setup.
2. Click [Add] in the Registration/Modification table.
3.
Enter Camera Name, Port No. and IP Address and click [Add].
Note
If the ID and password are set on the Security: Administrator window of Network
Camera, you have to enter the same ID (user name) and password. For more
information, please refer to Network Camera’s manual.
4.
When you have finished, click [Save]. The settings will be saved.
5.
Click [Restart Now!].