Panasonic KX-HGW600 - Manual (Page 144)

Operating Instructions
144
About Recording/Playback function
Problem Cause and Remedy
You cannot record the
Network Camera screen. • Make sure the connection between the Network
Camera and the KX-HGW600 have been
successfully made.
• Make sure the SD memory card has been inserted
firmly into the SD memory card slot.
• Administrator Only is checked on the Security:
Administrator window of Network Camera
([Security: Administrator]
1. Authentication
Enable). In this case, enter the ID (user name) and
password of the Network Camera on the Camera
Setup window. Please refer to Page 73 for the ID
(user name) and password setting.
• Your SD memory card is full. Delete the recorded
files or replace it with another SD memory card.
• Your SD memory card exceeds the maximum
number of files (150 files) available for one month
(Day 1st to 31st). Delete the recorded files or
replace it with another SD memory card.
• Your SD memory card is write-protected. Take the
write-protect away.
• The Network Camera is being recorded. Stop
recording it and try again.
• The Network Camera is reserved for the timer
recording. Disable the timer recording settings.
You cannot set up timer
recording. • Do not overlap the timer settings between Timer 1
and Timer 2.
You cannot record with the
specified Frame rate. • Frame rate changes with the network congestion.
Set up the lower Frame rate and try again.
You cannot play back the
recorded image. • Make sure the SD memory card has been inserted
firmly into the SD memory card slot.
• The Network Camera is being recorded or reserved
for the timer recording. Stop recording or disable the
timer recording settings and try again.
The time stamp of recorded
files is wrong. • The time stamp of recorded files synchronizes the
Network Camera internal clock. Adjust the date and
time setting of the Network Camera.
For more information, please refer to the Network
Camera’s manual.
You cannot delete the
recorded files or format your
SD memory card. • Your SD memory card is write-protected. Take the
write-protect away.
• The Network Camera is being recorded or reserved
for the timer recording. Stop recording or disable the
timer recording settings and try again.