Planet Technology MH-2001 - Manual (Page 66)

MH-2001 Multi-Homing Security Gateway User’s Manual
6.3 Schedule
MH-2001 allows the Administrator to configure a schedule for policies to take affect. By creating a schedule,
the Administrator is allowing MH-2001 policies to be used at those designated times only. Any activities
outside of the scheduled time slot will not follow MH-2001 policies therefore will likely not be permitted to pass
through MH-2001. The Administrator can configure the start time and stop time, as well as creating 2 different
time periods in a day. For example, an organization may only want MH-2001 to allow the LAN network users
to access the Internet during work hours. Therefore, the Administrator may create a schedule to allow
MH-2001 to work Monday-Friday, 8AM - 5PM only. During the non-work hours, MH-2001 will not allow
Internet access.
Entering the Schedule window
Step 1. Click
on Setting under Schedule menu and the schedule window will appear displaying the active
schedules.
Definitions:
Name: The name assigned to the schedule
Configure: Configure the settings of Schedule. Click Modify to change the parameters of the Schedule.
Click Remove to delete the Schedule.
If one of the Schedule has been added to Policy, Configure column will show the message –
. In this case, you are not allowed to modify or remove the settings. You have to remove the setting in
Policy window, and then you are allowed to configure the settings.
Adding a new Schedule
Step 1. Click on the New Entry button and the Add New Schedule window will appear.
„ Schedule Name: Fill in a name for the new schedule.
„ Period: Configure the start and stop time for the days of the week that the schedule will be
active.
Step 2. Click
OK to save the new schedule or click Cancel to cancel adding the new schedule.
- 60 -