Planet Technology MH-2001 User Manual
Page 33

MH-2001 Multi-Homing Security Gateway User’s Manual
For example, the leased line of a company applies several real IP Addresses 168.85.88.0/24 and the
company is divided into R&D, Customer Service, Sales, Procurement, and Accounting Department. The
company can distinguish each department by different sub-network for the purpose of convenient
management.
The settings are as the following:
1. R&D department: Alias IP of LAN interface - 168.85.88.1, Netmask: 255.255.255.192
2. Sales department: Alias IP of LAN interface - 168.85.88.65, Netmask: 255.255.255.192
3. Procurement department: Alias IP of LAN interface - 168.85.88.129, Netmask: 255.255.255.192
4. Accounting department: Alias IP of LAN interface - 168.85.88.193, Netmask: 255.255.255.192
Click Multiple Subnet under the System/Configure menu to enter Multiple Subnet window.
Multiple Subnet functions
WAN Interface IP / Forwarding Mode: Display WAN Port IP Address and Forwarding Mode which is NAT
Mode or Routing Mode.
Alias IP of Int. Interface / Subnet Mask: Local Interface IP Address and subnet Mask.
Modify: Modify the settings of Multiple Subnet. Click Modify to modify the parameters of Multiple Subnet or
click Remove to delete settings.
Adding a Multiple Subnet with Routing Mode
Step 1: Click the Add button below to add Multiple Subnet.
Step 2: Interface: Select LAN or DMZ Interface which you want to add a Subnet.
Alias IP of LAN Interface: Enter Subnet Interface IP Address.
Netmask: Enter Subnet Interface Netmask.
WAN Interface IP: Add WAN 1 or WAN 2 IP.
Forwarding Mode: Select the Routing button to enable Routing mode.
Step 3: Click OK to add Multiple Subnet or click Cancel to discard changes.
- 27 -