Planet Technology MH-2001 - Manual (Page 55)

MH-2001 Multi-Homing Security Gateway User’s Manual
6.1.6 DMZ Group
Entering the DMZ Group window
Click DMZ Group under the Address menu to enter the DMZ window. The current settings information for the
DMZ group appears on the screen.
Definitions:
Name: Name of the DMZ group.
Member: Members of the group.
Configure: Configure the settings of DMZ group. Click Modify to change the parameters of DMZ group Click
Remove to delete the selected group.
If one of the DMZ Group has been added to Policy, the Configure column will show the message –
. In this case, you are not allowed to modify or remove the DMZ group. You have to remove the
Group in Policy window, and then you are allowed to configure the DMZ Group.
Adding a DMZ Group:
Step 1. In the DMZ Group window, click the New Entry button and the Add New Address Group
window will appear.
Step 2. In
the Add New Address Group window the following fields will appear:
„ Name: Enter the name of the new group.
„ Available Address: List the names of all the members of the DMZ network.
„ Selected Address: List the names to assign to the new group.
„ Add members: Select the names to be added in the Available Address list, and click the
Add>> button to add them to the Selected Address list.
„ Remove members: Select the names to be removed in the Selected Address list, and click
the < button to remove them from the Selected Address list.
Step 3. Click
OK to add the new group or click Cancel to discard changes.
- 49 -