Planet Technology MH-2001 User Manual

Page 42

MH-2001 Multi-Homing Security Gateway User’s Manual

Setting WAN Interface Address

STEP 1﹒Select WAN in Interface and click Modify in WAN1 Interface.

The setting of WAN2 Interface is almost the same as WAN1. The difference is that WAN2 has a

selection of Disable. The System Administrator can close WAN2 Interface by this selection.

Disable WAN2 Interface

STEP 2﹒Setting the Connection Service (ICMP or DNS way)：

ICMP：Enter an Alive Indicator Site IP (can select from Assist)

DNS：Enter DNS Server IP Address and Domain Name (can select from Assist)

Setting time of seconds between sending alive packet.

ICMP Connection

DNS Service

Connection test is used for MH-2001 to detect if the WAN can connect or not. So the

Alive Indicator

Site IP, DNS Server IP Address, or Domain Name must be able to use permanently. Or it will cause

judgmental mistakes of the device.

- 36 -