Planet Technology MH-2001 - Manual (Page 28)

MH-2001 Multi-Homing Security Gateway User’s Manual
MTU (set networking packet length)
The administrator can modify the networking packet length.
Step 1. MTU Setting. Modify the networking packet length. ( Range 40 – 1500 )
Step 2. Click OK at the bottom-right of the screen.
Dynamic Routing (RIPv2)
Enable Dynamic Routing (RIPv2), MH-2001 will switch the routing information of RIP. The routers which
support RIP can connect automatically. You can choose to enable LAN, WAN1, WAN2 or DMZ interface to
allow RIP protocol supporting.
Routing information update timer: MH-2001 will send out the RIP protocol in a period of time to update the
routing table, the default timer is 30 seconds.
Routing information timeout: If MH-2001 does not receive the RIP protocol from the other router in a period
of time, MH-2001 will cut off the routing automatically until it receives RIP protocol again. The default timer is
180 seconds.
- 22 -