Planet Technology MH-2001 - Manual (Page 292)

MH-2001 Multi-Homing Security Gateway User’s Manual
9.4 Wake on Lan
The MIS engineer can use the MH-2001 appliance to start up the internal PCs (by sending packets) which
included the network bootable network adapter and can additionally use the remote monitor software such as
VNC, Terminal Service and PC Anywhere.
In this chapter, we will make the introduction of Wake on Lan.
Remote monitor the internal PC
STEP 1 . The internal PC to be remote monitored, and its MAC is 00:0C:76:B7:96:3B.
STEP 2 . In Wake on Lan Æ Setting, add the following settings :
„ Click New Entry.
„ Name, enter josh.
„ MAC Address, enter 00:0C:76:B7:96:3B.
„ Click OK.
Set the internal PC to be monitored
STEP 3 . Click Wake Up, to start up the internal PC.
Start up the PC
- 286 -