Planet Technology MH-2001 - Manual (Page 34)

MH-2001 Multi-Homing Security Gateway User’s Manual
4.2.4 Route Table
In this section, the Administrator can add static routes for the networks.
Entering the Route Table screen
Click Route Table under the System/Configure menu and the Route Table window will appear, in which
current route settings are shown.
Route Table functions
„
Interface: Destination network through the Interface, LAN, DMZ or WAN 1.
„ Destination IP: IP address of destination network.
„ NetMask: Netmask of destination network.
„ Gateway: Gateway IP address for connecting to destination network.
„ Configure: Modify or remove the settings in the route table.
Adding a new Static Route
Step 1. In the Route Table window, click the New Entry button.
Step 2. In the Add New Static Route window, enter new static route information.
Step 3. In the Interface pull-down menu, choose the Interface to connect (LAN, WAN1, DMZ).
Step 4. Click
OK to add the new static route or click Cancel to cancel.
- 28 -