Paradyne M/HDSL Standalone Termination Unit HOTWIRE 7986 - Manual (Page 126)

Index
IN-4 7986-A2-GB20-10 December 1998
SNMP Management Configuration, A-19
SNMP management
general, 1-5
limiting access, 7-4
SNMP NMS Security Options, A-19, A-21
SNMP Trap Options, NMS n IP Address, A-22
start-up, ATI, 2-1
status, test messages, 4-6
subnet, IP addresses, 8-1
Switchpack definitions, 3-9
Switchpack locations, 3-8
Switchpack S1 Definitions, 3-9
Switchpack S2 Definitions, 3-10
system, LEDs, 4-14
System Options, A-6
T
Telnet session
access level, A-12, A-14
enable/disable, A-12, A-14
inactivity timeout, A-10, A-12
login required, A-12, A-14
telnet session access, 7-1
telnet session options, A-11, A-13
terminal
communication parameters, 3-3
connecting, 3-3
terminal port, direct connection, 2-1
test
aborting, 5-9
DTE Loopback, 5-5
LED, 4-14
Line Loopback, 5-3
Network-Initiated DCLB, A-5
Remote Send Line Loopback, 5-6
Repeater Loopback, 5-4
Send and Monitor 511, 5-7
status messages, 4-6
terminating, 5-9
Test Duration, A-7
Test Timeout, A-6
Test menu, 5-2
testing, 5-1
timeout
Com port session inactivity, A-10
Telnet session inactivity, A-12
traps, SNMP, 6-2, B-1
troubleshooting, 6-5
DSL performance statistics, 4-9
error statistics, 4-7
G.703 performance statistics, 4-11
U
UNIX, TFTP server on, 3-15
user interface, 3-3
async terminal, 2-1
how to access, 2-1
resetting/restoring access, 7-5
V
virtual function keys, 2-7
W
warmStart, B-1
weight of unit, D-1