Paradyne M/HDSL Standalone Termination Unit HOTWIRE 7986 - Manual (Page 124)

Index
IN-2 7986-A2-GB20-10 December 1998
D
dc power option, 3-2– 3-18
default configuration area, 3-6
delete, Login ID, 7-4
device, messages, 6-3– 6-4
dimensions, D-1
Disconnect Time, for Telnet session, A-10, A-12
documents, related, vi
DOS, TFTP server on, 3-15
download code, 3-18
Download Failed, status message, 4-4
DSL Line Rate, 3-10
Fixed Rate, 3-14
DSL Line Rates, 3-14
DSL Port, LEDs, 4-14
DSLAM, defined, 1-2
DTE loopback , 5-5
E
EER (Excessive Error Rate) , status message, 4-3
effective access level, 7-1
ending an ATI session, 2-9
enterprise, SNMP traps, B-3
environment requirements, D-1
error messages, line 24, 6-3
error statistics, 4-7
ESD precautions, 3-7
Excessive Error Rate (EER) Threshold, A-2, A-5
F
factory default configuration options, resetting, 7-5
factory defaults, 3-6
Failure, self-test result, 4-5
feature numbers, D-1
features, 1-2
firmware, download from server, 3-18
Front Panel LEDs, 1-4
G
G.703 Interface Impedance, A-7
G.703 Interface Options, A-4
G.703 Interface Option settings, A-4
Port Status, A-4
G.703 Props, LEDs, 4-14
General SNMP Traps Options, A-19
H
health and status messages, 4-3
I
identity, 3-4
Impedance, A-7
inactivity timeout, for Telnet session, A-10, A-12
Initial Startup and Configuration, 3-1
intended audience, v
Internal Switches, 3-7
Manual configuration, Internal Switches, 3-7
IP address
DSL peer, A-3
SNMP manager, 7-5
IP addresses, 8-1
IP addressing, example, 8-2
K
keyboard functions, 2-6
L
lamp test, 5-8
LEDs, 4-13, 4-14
Line Coding Format, A-4
Line Framing , A-5
Link Up, LEDs, 4-14
link-layer protocols, 8-1
linkUp and linkDown traps, B-2
local line loopback (LLB), 5-3
LOF (Loss Of Frame), status message, 4-3
Login ID
access levels, 7-1
adding, 7-2
deleting, 7-4
login ID, 7-1
loopback, effect on LEDs, 4-14
LOS (Loss Of Signal), status message, 4-3