Snmp nms security options, A-21, Table a-9 – Paradyne M/HDSL Standalone Termination Unit HOTWIRE 7986 User Manual

Page 103: Able a-9, In appendix a

Configuration Option Tables

A-21

7986-A2-GB20-10

December 1998

SNMP NMS Security Options

SNMP configuration options allow you to specify the information necessary to
support the Termination Unit SNMP NMS Security. To access the SNMP NMS
Security Options screen, follow this menu selection sequence:

Main Menu

→

Configuration

→

Load Configuration From

→

Edit

→

Management and Communication

→

SNMP

→

Security

ООООООООООООООООООООООООО

main/config/management/security

Hotwire

Slot: 4

Model: 8774

SNMP NMS SECURITY OPTIONS

NMS IP Validation:

Enable

Number of Managers:

NMS 1 IP Address:

135.014.040.001

Clear

Access Type: Read/Write

NMS 2 IP Address:

135.014.003.027

Clear

Access Type: Read/Write

NMS 3 IP Address:

135.014.001.008

Clear

Access Type: Read

NMS 4 IP Address:

135.014.002.024

Clear

Access Type: Read

NMS 5 IP Address:

204.128.146.035

Clear

Access Type: Read

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Table A-9.

SNMP NMS Security Options (1 of 2)

NMS IP Validation

Possible Settings: Enable, Disable
Default Setting: Disable

Specifies whether security checking is performed on the IP address of SNMP
management systems attempting to access the node.

Enable – Security checking is performed on the IP address of SNMP management
systems attempting to access the node.

Disable – No security checking is performed.

Number of Managers

Possible Settings: 1, 2, 3, 4, 5
Default Setting: 1

Specifies the number of SNMP management systems that can send SNMP messages.

1 to 5 – Number of trap managers. An NMS IP address is required for each manager.