Pioneer Multi Projection System RM-V1000NU - Manual (Page 97)

96
OPERATIONS • MAINTENANCE
[1]
[2] [3] [6] [7]
[4] [5]
Pull in this direction
7 Replacement of MVP
[1] Remove rear covers C (R) and (L). (6 screws)
[2] Remove the UL cover A. (6 screws)
[3] Remove the UL cover C. (2 screws)
[4] Disconnect the MVP power cord.
[5] Disconnect the connectors and remove the power supply. (3 screws)
[6] Remove the four screws in front of the MVP.
[7] Tilt the MVP slightly, and pull it out.
UL cover A
Rear cover C (R)
Rear cover C (L)
UL cover C