Pioneer Multi Projection System RM-V1000NU - Manual (Page 121)

120
APPENDIX (MVP manual)
To Set Internal Sync [INT command]
Input : INT
Explanation : • Forcibly sets internal sync.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)
To Set External Sync [EXT command]
Input : EXT
Explanation : • Forcibly sets external sync.
However, if the GEN LOCK able signal is not input to the GEN LOCK IN (reference input) terminal,
external sync will not be set.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)
To Select Composite Video Input [CIB command]
Input : CIB
Explanation : • Select the composite video input of NTSC input board.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)
To Select YC Separation Input [YIB command]
Input : YIB
Explanation : • Selects the Y/C separation input of the NTSC input board.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)