Pioneer Multi Projection System RM-V1000NU - Manual (Page 13)

12
GENERAL SPECIFICATIONS
(3) Multi Video Processor (Referred to MVP below)
Input signal
Input video signal (NTSC) Note 1
1-line ............................................. BNC terminal
(One RGB input system can be added with addition
of optional RGB board)
1 Composite video signal
...................... 1.0 V(p-p) (75ohm terminated)
2 Y/C separation signal
Y (With sync) ................... 1.0 V(p-p) (75ohm)
C burst level ................. 0.286 V(p-p) (75ohm)
* 1 or 2 signal format can be selected
3 Optional RGB input signal
RGB signal ........................ 0.7 V(p-p)(75ohm)
H.V .................................................... TTL level
C SYNC ............. 0.3-4 V(p-p) (Negative logic)
Green (Sync on Green) ... 1.0 V(p-p) (75ohm)
SYNC ............................................... 0.3 V(p-p)
SYNC priority order
H.V > C SYNC > Green (Sync on Green)
RS-232C control input 25-pin D-SUB
Output signal
Output video signal
4-line .............................................. BNC terminal
1 Composite sync signal ..... 1.0 V(p-p) (75ohm)
2 Y/C separation signal
Y (With sync) .................... 1.0 V(p-p) (75ohm)
C (With burst) Burst level
....................................... 0.286 V(p-p) (75ohm)
* 1 and 2 signal formats are output simulta-
neously.
3 RGB signal
Green (Sync on Green) ................... 1.0 V(p-p)
SYNC ................................................ 0.3 V(p-p)
B.R .................................................... 0.7 V(p-p)
Note 1: The built-in multi video processor can be made
usable for RGB and PAL inputs if options are
added. For more information, contact Pioneer.