2) inserting the option board (mvp) – Pioneer Multi Projection System RM-V1000NU User Manual

Page 31

Text mode
Original mode

INSTALLATION AND ASSEMBLY

(2) Inserting the Option Board (MVP)

[1] Remove the rear cover C (R) and rear cover C (L). (Six screws for each)
[2] Remove the UL cover A. (Six screws)
[3] Remove the UL cover C. (Two screws)
[4] Disconnect the MVP power cord.
[5] Disconnect the connector and remove the power supply. (Three screws)
[6] Remove the four screws in front of the MVP.
[7] Tilt the MVP slightly, and pull it out.

[1]

Rear cover C (L)

Rear cover C (R)

[2] [3] [6] [7]

UL cover A

UL cover C

[4] [5]

Pull in this direction