Pioneer DVR-LX60D - Manual (Page 83)

Playback
83
En
08
Check the disc packaging for details of the
soundtrack options.
• Change the audio soundtrack.
The current audio language is shown on-
screen and in the front panel display.
• The sound may drop out for a few
seconds when switching soundtracks.
• Some discs feature both Dolby Digital
and DTS soundtracks. There is no analog
audio output when DTS is selected. To
listen to the DTS soundtrack, connect
this recorder to a DTS decoder or AV
amp/receiver with built-in DTS decoder
via the digital output. See
Connecting to
an AV amplifier/receiver on page 20 for
connection details.
Switching audio channels
For HDD
1
and VR mode content recorded
with bilingual audio, you can switch between
left (
L ) channel, right ( R ) channel, or both
( L+R ). 2
When playing Video CDs and audio CDs you
can switch between stereo, just the left
channel or just the right channel.
Some Super VCDs have two soundtracks.
With these discs you can switch between the
two soundtracks as well as individual
channels in each.
• Press repeatedly to display/switch
the audio channel.
The audio channel(s) currently playing are
indicated on-screen.
L+R – Both channels (default)
L – Left channel only
R – Right channel only
Stereo – Stereo (default)
1/L – Left channel only
2/R – Right channel only
1 Stereo – Soundtrack 1/Stereo (default)
1 L – Soundtrack 1/Left channel
1 R – Soundtrack 1/Right channel
2 Stereo – Soundtrack 2/Stereo
2 L – Soundtrack 2/Left channel
2 R – Soundtrack 2/Right channel
Switching camera angles
Some DVD-Video discs feature scenes shot
from two or more angles — check the disc
box for details: it should be marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the
same icon appears on screen to let you know
that other angles are available (this can be
switched off if you prefer — see
Angle
Indicator on page 137).
• Switch the camera angle.
• The angle number is displayed on-
screen.
• If the disc was paused, playback starts
again with the new angle.
Note
1 Only when HDD Recording Format is set to Video Mode Off ( HDD Recording Format on page 136).
2 When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via
the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby Digital PCM (see
Dolby Digital Out on page 133) or listen via the analog outputs if you need to switch the audio channel.
AUDIO
DVD (VR) DVD-RAM HDD CD Video CD Super VCD
WMA/MP3
AUDIO
HDD DVD (VR) DVD-RAM
CD Video CD WMA/MP3
Super VCD
DVD-Video
ANGLE
DVRLX60D_WV_EN.book 83 ページ ２００７年３月２６日 月曜日 午後１２時１６分