Getting started – Pioneer DVR-LX60D User Manual
Page 35
Getting started
35
En
04
recorder needs to be in standby; it will wake
up automatically and download new codes
from the host channel. The next day, try this
setup process again:
• Press
GUIDE
to display the GUIDE
Plus+ screen.
• Press
to highlight the Menu bar, then
use
to reach the Setup area and
select Setup.
• Continue setting up from the start of this
step again.
If your external receiver still doesn’t respond
to the G-LINK controller, please call
customer support and report the brand and
model of your external receiver.
See also
GUIDE Plus+ FAQ and
troubleshooting
on page 48.
5
Identify the host channel for your
country.
The TV listings information available in the
GUIDE Plus+ system is distributed
throughout Europe by selected broadcasters
called
host channels
. It is important that the
host (analog) channel for your country is
correctly identified in order to receive
listings information (EPG download).
Follow
A
,
B
or
C
below depending on your
setup:
A
If you
are not
using an external
receiver, this recorder will automatically
scan all channels for the host channel:
• Leave the recorder in standby overnight
(do
not
leave it switched on).
B
If you
are
using an external receiver,
you need to identify the host channel
from the table below:
• Tune your external receiver to the
appropriate host channel and leave the
receiver on and the recorder in standby
overnight.
C
If you use
both
an external receiver
and this recorder as sources, follow the
instructions above for setting up without
an external receiver. Only if this is
unsuccessful try the external receiver
method.
About EPG download
• EPG data can only be received when the
recorder is in standby. (When not using the
recorder, therefore, please switch it into
standby.) If you’re using an external receiver,
leave this on when EPG data is downloading.
• If you cannot receive any of the host
channels (see the above table) then you
won’t be able to use the GUIDE Plus+
system. In this case do not set the postal
code (or set Country to
Other
) in the
GUIDE Plus+ setup screen. (When
GUIDE Plus+ service starts in your area,
set the postal code again.)
If digital broadcasts start in your area,
please set the
EPG Type Select
setting in
the Initial Setup menu to
Digital EPG
.
Country/
Region
Host
channels
Comments
Austria
Eurosport
Belgium
RTL-TVI
France
Canal+
Analog only
Germany
Eurosport
Italy
MTV
Analog only
Netherlands Eurosport
Spain
Tele 5
Analog only
Switzerland
Eurosport
UK
ITV, Eurosport ITV is analog only. Use
Eurosport if you are a
SKY subscriber and
you no longer have an
analog terrestrial
antenna.
DVRLX60D_WV_EN.book 35 ページ 2007年3月26日 月曜日 午後12時16分