Pioneer DVR-LX60D - Manual (Page 70)

Recording 07
70
En
Simultaneous recording and
playback (Chase Play)
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is ‘chasing’ the
recording).
In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see
Using the Disc Navigator with recordable
discs and the HDD on page 78).
Chase Play is not possible when DV is the
recording input.
• Press during recording to start
playback from the beginning of the
current recording
1
.
• Press during recording to select
another title to play.
You can use all the usual playback controls,
such as pause, slow-motion play, scan and
skip.
• To stop playback, press STOP
(recording will continue).
• To stop recording, press STOP REC
(playback will continue).
• During recording or in timer recording
standby, you can’t play an HDD title,
DVD or Video CD/Super VCD disc if the
Input Line System setting doesn’t match
the TV line system of the disc/HDD title
(see also
Additional information about
the TV system settings on page 141).
Also, during simultaneous recording
and playback, if the TV line system of the
playback track/title changes then
playback will automatically stop.
Recording from an external
component
You can record from an external component,
such as a camcorder or VCR, connected to
one of the recorder’s external inputs.
1 Make sure that the component you
want to record from is connected
properly to the HDD/DVD recorder.
See Chapter 2 ( Connecting up ) for
connection options.
2 Press repeatedly to select one of
the external inputs to record from.
The current input is shown on-screen and in
the front panel display:
• AV2/L1 – Input 1
2
• L2 – Input 2 (front panel)
• L3 – Input 3
Check that the Audio In settings for
External Audio and Bilingual Recording
are as you want them (see Audio In on
page 132).
• If the aspect ratio is distorted (squashed
or stretched), adjust on the source
component or your TV before recording.
• To watch video coming in via the DV
input (front panel), select DV > DV
Video Playback from the Home Menu
(see also Playing from a DV camcorder on
page 85).
3 Set the recording quality.
• See Setting the picture quality/recording
time on page 64 for detailed information.
Note
1 You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work
while copying or backing up.
HDD
DISC
NAVIGATOR
2 This cannot be selected if AV2/L1 In is set to Decoder (see AV2/L1 In on page 132).
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
INPUT SELECT
REC MODE
DVRLX60D_WV_EN.book 70 ページ ２００７年３月２６日 月曜日 午後１２時１６分