Pioneer DVR-LX60D - Manual (Page 23)

Connections
23
En
02
Important
• Some USB devices may not work with
this recorder.
• When connecting a PC to this unit, make
sure the power is turned off on both the
PC and this unit when you connect them
via USB.
• We recommend connecting USB
devices when this recorder is switched
off (in standby).
JPEG file storage devices
• Digital still camera
• Memory card reader (any type of
memory card)
• USB memory
The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if the
device is partitioned, this recorder may not
recognize it.
The Picture Transfer Protocol (PTP) can be
used to transfer up to a maximum of 4000
files.
WMA/MP3 file storage devices
• Memory card reader (any type of
memory card)
• USB memory
• PC (Use Connect PC function)
The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if the
device is partitioned, this recorder may not
recognize it.
Note that although multi-slot card readers
can be used, the recorder will only recognize
the first card inserted. To read another card,
remove all the cards and insert the card to be
read again.
Using a USB hub
• Use a hub compatible with USB 1.1 and/
or 2.0.
• Use an independently powered hub (bus
powered hubs may not work reliably).
• In the event of unreliable operation with
the hub, we recommend plugging the
device directly into the recorder’s USB
port.
• Operation may become unreliable if too
many devices are connected to the hub.
In this case, try unplugging some
devices.
• If the power delivered through a hub is
insufficient for the devices connected,
communication can become unreliable.
In this case, disconnect one or more
devices then perform a USB restart. (See
Restart USB Device on page 140.)
Using a USB printer
• Use a PictBridge-compatible printer.
Using a USB keyboard
• Do not use a PS/2 keyboard connected
using a PS/2-USB adapter.
Using a PC
• Note that you can connect a PC to this
device via USB to copy WMA and MP3
files. For more information, see
Connect
PC on page 109. To use Connect PC with
this device, your PC must run either the
Windows XP Home Edition (SP2) or
Windows XP Professional (SP2)
operating system and be able to run
Windows Media Player 10. Even if your
PC can run Windows Media Player 10,
we cannot guarantee that it will function
properly with this device. For more
details see the ‘Help’ section of Windows
Media Player 10.
Plugging in
After checking all the connections, plug in
the recorder.
• Use the supplied power cable to
connect this recorder to a power outlet.
DVRLX60D_WV_EN.book 23 ページ ２００７年３月２６日 月曜日 午後１２時１６分