Pioneer DVR-LX60D - Manual (Page 69)

Recording
69
En
07
• If VPS/PDC is active for two timer
programmes that are programmed to
start at the same time, then the
programme that actually starts first
takes priority.
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time. This can be useful if
a broadcast programme overruns, for
example.
Cancelling or extending the timer
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been cancelled.
2 Press repeatedly to extend
recording in 30 minute blocks.
Stopping a timer recording
1 Press during a timer recording.
2 Select ‘Yes’ to confirm.
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCKED . If any buttons are pressed on the
remote or front panel, LOCKED is briefly
displayed again.
• To unlock the recorder, press and hold
(Stop) on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCKED .
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder
doesn’t start recording!
Check that the disc loaded or HDD is
recordable, not locked (see
Lock Disc on
page 121), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won’t let me enter a timer
programme! Why not?
You can’t enter a timer programme if the
clock isn’t set.
• What happens when two or more timer
programmes overlap?
Basically, the programme with the earlier
recording start time has priority.
However, the recorder will start recording
the programme with the later start time
after the earlier programme is finished. If
schedule to record two programmes
have the same times (but different
channels, for example), then only one of
the two programmes will be recorded. In
this event you should cancel the
scheduled recording of the lesser
important programme. If one of the
overlapping programmes is a regular
timer programme for a digital broadcast,
you may choose
‘Cancel Once’ in order
to avoid having it overlap with a
separately scheduled programme
(see
Skipping a regular timer programme on
page 56) .
REC
REC
STOP REC
ENTER
STANDBY/ON
DVRLX60D_WV_EN.book 69 ページ ２００７年３月２６日 月曜日 午後１２時１６分