Polycom Webcam - Manual (Page 96)

ViewStation EX User Guide
94 www.polycom.com
Configuring H.323 Name and Extension
The H.323 name and extension that can be used to dial your system
are configured in the H.323 Setup screen.
To access the H.323 Setup configuration screen:
Select System Info > Admin Setup > LAN/H.323 > H.323 > Setup.
The H.323 Setup screen appears.
Figure 4-4. H.323 Setup Screen (configuration)
Following is a description of the options displayed on the screen:
❑
H.323 Name when calling this system —Your system name
appears as your H.323 name, but you can change it on this
screen.
❑
H.323 Extension (E.164) —This is the number that is needed to
access a specific LAN device for incoming calls. You can change
the extension to a number that is easy to remember. Your
administrator might have specific names and extensions. If you
have a Gatekeeper installed on your network, other parties can
call you by using the H.323 name or extension. The H.323 name
and extension are registered with your Gatekeeper.
❑
Auto H.323 Dialing —When this option is enabled, the system
is able to automatically detect the type of call you are placing (IP
or ISDN) based on the video number format. Consequently, the
ISDN
(or V.35) and IP fields are not visible on the Video Phone
screen. This option is enabled by default.