Placing a call from the web interface, Answering a video call manually, Placing a call from the – Polycom Webcam User Manual
Page 157: Web interface, Placing a call using the application programming, Interface
Chapter 5 - Using the ViewStation EX
© Polycom, Inc. 2003
155
1.
To lock the number, highlight the entry on the Speed Dial
screen.
2.
Press the # button on the remote control. A Lock icon appears
next to Speed Dial entries that are locked.
To unlock a Speed Dial entry:
1.
To unlock a number, highlight the entry.
2.
Press the * button on the remote control.
Placing a Call from the Web Interface
For instructions about how to place a video call from the Web
interface, refer to
Features of the Web Interface on page 229
Placing a Call Using the Application Programming Interface
For instructions about how to place a call using the API, refer to the
ViewStation EX, ViewStation FX, and VS4000 ARENA API
Programmer’s Guide.
Answering a Video Call Manually
The ViewStation EX is set by default to automatically answer
incoming calls.
To set your system to answer video calls manually:
1.
From the main screen, select System Info > Admin Setup >
General Setup
or select System Info > User Setup.
2.
Highlight the field next to Auto Answer Point to Point, and
select the No option from the drop-down menu.
3.
When there is an incoming call, the user will be prompted with
a message “You have a video call. Would you like to answer?”
This message is followed by a video number and a far-site name