Polycom Webcam - Manual (Page 91)

Chapter 4 - Advanced Configuration for your Network Environment
© Polycom, Inc. 2003 89
network. This is the subnet mask of the LAN to which your
system is connected.
If the DHCP Client option is selected, the subnet mask address
is automatically filled in and you cannot make any change to
this field. If the DHCP Off option is selected, you need to enter
the address manually. The subnet mask can be obtained from
your network administrator or your IT department.
❑
WINS Server —This is a Windows NT computer that resolves
computer names to IP addresses in a routed environment. Find
out from your network administrator or your IT department
whether you need a WINS Server IP address or not.
Selecting Advanced LAN Settings
You can select the LAN port on your system and set or change its
LAN speed and duplex mode on the Advanced LAN Settings
screen.
To access the Advanced LAN Settings screen:
Select System Info > Admin Setup > LAN/H.323 > LAN/Intranet >
Advanced LAN Settings
.
Figure 4-2. Advanced LAN Settings Screen
On the Advanced LAN Settings screen, you can select a LAN port
and a LAN speed as described below: