Polycom Webcam - Manual (Page 289)

Appendix A - Screen Reference
© Polycom, Inc. 2003 287
User Setup Screen Reference
The User Setup screen is used to set user preferences that can be
made every time the system is used. None of these items require a
system reboot to take effect.
Note
This screen is not password protected, however, access to this screen
may be eliminated by disabling the Allow User Setup option in the
General Setup
screen.
To access the User Setup screen:
Select System Info > User Setup:
Figure A-1. User Setup Screen
You can use the User Setup screen to set the following options:
❑
Auto Answer Point to Point —This option lets you set the Auto
Answer mode for a point-to-point call.
To set the mode, select the appropriate option from the
drop-down menu in the Auto Answer Point to Point field.
These options are No, Yes, and Do Not Disturb; they are
described below: