Crypto resync pulse, Software and hardware screens, Crypto resync pulse software and hardware screens – Polycom Webcam User Manual
Page 315
Appendix A - Screen Reference
© Polycom, Inc. 2003
313
❑
Enable Remote Access
—This option gives administrator the
the capability to lock out access to FTP, Web, Telnet, and SNMP.
The FTP, Web, Telnet, and SNMP options are enabled by
default.
❑
Crypto Resync
—This option is only available if a
V.35/RS-449/RS-530 network interface is attached to your
system.
Crypto Resync Pulse
This screen is specific to a ViewStation EX system with a
V.35/RS-449/RS-530 network interface.
To access the Crypto Resync Pulse screen:
1.
Select System Info>Admin Setup>Security.
2.
In the Security screen, select the Crypto Resync option.
Note
For more configuration information, refer to
.
Software and Hardware Screens
To access the Software, RS-232, Hardware Information, Send
Address Book, and Far Site Software Update, and System
Options screens:
Select System Info > Admin Setup > Software/Hardware.