Entering v.35/rs-449/rs-530 video numbers, Figure 3-10.video numbers screen, Entering v.35/rs-449/rs-530 video – Polycom Webcam User Manual
Page 75
Chapter 3 - Initial System Setup
© Polycom, Inc. 2003
73
Prefixes and suffixes are a function of your DCE. Please consult the
DCE user guide for additional information on setting dialing
profiles.
Entering V.35/RS-449/RS-530 Video Numbers
If you enabled RS-366 Dialing, the Video Numbers screen appears.
Figure 3-10.
Video Numbers Screen
To enter video numbers:
1.
Enter the numbers that other sites can dial to call your system.
2.
When you have finished, review your entry, then highlight the
Save
icon and press the SELECT button on the remote control.
For additional information about V.35/RS-449/RS-530
configuration, see
Advanced V.35/RS-449/RS-530 Network
Interface Configuration on page 103
The initial configuration process specific to the V.35/RS-449/RS-530
network interface is complete. To continue with the initial
configuration process, skip to
.
Note
If you disabled RS-366 Dialing, you are operating in direct connect
mode and the Video Numbers screen will not be displayed.