Polycom Webcam - Manual (Page 314)

ViewStation EX User Guide
312 www.polycom.com
❑
Vertical Position —With this option you can calibrate the VGA
input in the vertical position by moving the calibration frame up
or down.
Security
The Security screen lets you set the passwords used to access your
ViewStation EX system remotely. You are not required to set
passwords on your system.
To access the Security screen:
Select System Info > Admin Setup > Security.
❑
Admin Password —This password is used to protect nearly all
setup screens in the user interface. When using the system Web
interface, you are required to enter the admin password, if one
has already been set in the Security screen.
❑
Meeting Password —This password is used:
• As the password for the system when it it is used as an MCU
in a multipoint conference.
• For dialing into an MCU with a password already set.
• As the password for viewing slides on the Web interface.
• As the password for viewing streams on the Web interface.
• For accessing Closed Caption on the Web interface.
If no password is set, the user is not prompted for or does not
need to enter the Meeting Password.
❑
Software Update Password —This password is used for ISDN
software upgrades of your system. The system can be upgraded
from a remote endpoint while in an ISDN call. This password
also protects your system from any unwanted updates.
❑
Enable Remote Access —This option gives administrator the
the capability to lock out access to FTP, Web, Telnet, and SNMP.
The FTP, Web, Telnet, and SNMP options are enabled by
default.