Polycom Webcam - Manual (Page 234)

ViewStation EX User Guide
232 www.polycom.com
4. Select the line speed.
5. Select the call type (ISDN, IP, or AUTO).
Note
Note that if Auto H.323 Dialing is enabled on the system
(Admin Setup > LAN/H.323 > H.323 > Setup), the system will
be able to auto-detect the type of call you are placing (IP or
ISDN) based on the video number format. Consequently, the
ISDN
and H.323 fields on this Web page are not visible.Auto
H.323 Dialing is enabled by default.
6. Click the Call button.
To terminate your call:
Click the Hang Up button.
Loading and Selecting a Slide Presentation
The following explains how to load a slide presentation from the PC
to the ViewStation system using the Web interface and present those
slides in a video call.
The following lists key information about loading a presentation:
❑
The system is only compatible with Microsoft PowerPoint 97 or
higher.
❑
Because the system does not have a hard drive, the computer
that is used to upload the presentation must be left on during
the presentation and the pcPresent application window must be
active.
❑
You can load up to eight presentations on a system. Each
presentation must originate on a separate PC.
❑
The PC from which you are presenting cannot be running an
FTP service.