Answering calls, Ending calls, Answering calls -6 ending calls -6 – Polycom 7000 User Manual
Page 68
User Guide for the Polycom SoundStation IP 7000 Phone
3 - 6
2.
Do one of the following:
— Enter the speed dial index number.
or
— If the contact you want to call is not already highlighted, scroll to the
contact, and then press the Dial soft key.
The call is placed.
Answering Calls
To answer a call:
>>
Press
or
the
Answer soft key.
The LEDs blink green when the phone rings.
To answer a call on a shared line:
1.
Answer the incoming call.
2.
Press the Hold soft key.
Anyone on another phone configured to use the same shared line may take the
call by selecting the call on their phone screen.
Ending Calls
To end a call:
>>
Press
or
the
End Call soft key.
Note
•
To ignore incoming calls, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines). To prevent your phone from ringing, enable
the Do Not Disturb feature (see
).
•
You can forward incoming calls by pressing the Forward soft key. See
on page
•
If you set up your phone with a silent ring, press the Answer soft key to answer
the call.
•
To answer a call from a mobile phone or computer calling application, see
Computer or Mobile Audio with the Conference Phone
on page
.
Note
You cannot end a call that is on hold until you resume the call. To end a call on hold,
scroll to the call on hold, press the Resume soft key, and then press the End Call
soft key.