Registering the phone, Before you use your phone – Polycom 7000 User Manual
Page 22
User Guide for the Polycom SoundStation IP 7000 Phone
1 - 14
Registering the Phone
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after you set up your phone, the phone will be registered
and ready to use.
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it.
For detailed information on how to register your phone after you install it, see
Quick Tip 44011: Registering Standalone SoundPoint IP and SoundStation IP
Phones, available at
Before You Use Your Phone
Before you use your phone, familiarize yourself with the phone’s features, the
icons that display on the screen, and how to navigate menus and enter data.
Note
Since you can customize your phone in many different ways, and your
system administrator can enable and disable certain features, the user
interface that displays on your phone may differ from the figures that
appear in this guide.