2 feature access – Polycom SpectraLink NetLink E340 User Manual

Page 36

SpectraLink Corporation

Configuration and Administration—NetLink e340/i640 Wireless Telephone

Cisco CallManager and IP Phone 7960 Emulation

72-1082-02-G.doc

Page 36

7.2 Feature Access

All features are viewed with the handset off hook. Press the

Start Call

button to go

off hook. To dial a call, you may use predialing by dialing the number and then

pressing

Start Call

and selecting the line.

Line appearances

Press the

Line

key to view a list of available line appearances and their assigned

extensions. To access a line and make a call, press the corresponding key. Press the

End Call

button to exit the Line Appearance list.

Speed dial, Mute, Voicemail and OAI

Press the

FCN

key while off hook to display the Mute, Voicemail and OAI features

and the first four items in the speed dial list. Activate the feature by pressing the
corresponding key as shown on the display or by pressing the shortcut key. Press

FCN

again to scroll through the programmed features. Press the

End Call

button to

exit the Function list.

Features
Whenever the handset is active, the softkey abbreviations display. Each feature
abbreviation is shown above the corresponding softkey. Pressing the feature’s

corresponding softkey or pressing the

key plus the shortcut key will activate

the feature. Press the

key for an expanded description of the softkey features.

Use the side buttons (

Select

Down

) to scroll through the features. The

Select

button will activate the selected feature. Pressing the softkey or shortcut key will

activate the feature even if it is not selected or shown on the

display. Press the

softkey to display the next set of programmed features. Press the

End

Call

button to exit the Feature list.