Polycom SpectraLink NetLink E340 - Manual (Page 35)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-G.doc Page 35
7.1 Feature Assignment
In CallManager, Line keys 1-4 may be assigned to line appearances or to speed dial
numbers. Line appearances are displayed on the handset in the Line Appearance List.
Speed dial numbers are displayed in the Function List.
The Mute, Voicemail and OAI features are assigned to a function key sequence as
described below. These features are displayed in the handset Function List.
All other features are assigned to the softkeys. The softkeys on the NetLink
e340/i640 emulate the softkeys on the Cisco 7960 deskset.
If an Open Application Interface (OAI) is operational, a function key
sequence will be assigned in the OAI configuration. Any sequence(s) utilized
by OAI will have priority in the Function display list. The other functions
assigned to this list will appear in this order: Mute, Voicemail, speed dial
numbers.
E.g. If OAI is assigned to FCN 3 and FCN 6 , then Mute will be FCN 1 ,
Voicemail will be FCN 2 , and speed dial numbers will be FCN 4 , 5 , 7 , 8 , and
so on.