Polycom SpectraLink NetLink E340 - Manual (Page 17)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-G.doc Page 17
Entering and editing Admin menu options
An asterisk (*) next to an option indicates that it is selected. Use the Up , Down , and
Select side buttons and the softkeys to navigate and select:
Up/Down buttons: Display previous/next menu item.
Select button: Selects the menu item or option.
OK softkey Selects the menu item or option.
Save softkey: Saves the entry.
Bksp softkey: Backspaces to allow editing of entry.
Cncl softkey: Cancels edit and returns to previous menu level.
Up softkey: Returns to previous menu level.
Exit softkey: Exits the menu (at the top level).
End Call key: Exits to standby state (from any level)
Alphanumeric string entry
1. Press the first digit/letter. The digit displays. Press the key again to scroll through
the letters associated with that key.
Example: if you press 2 repeatedly, you will see 2, A, B, and C, a, b, and c.
The following table shows which key will allow you to enter non-numeric
characters or other characters not represented on the keypad.
To Enter Press
. - _ ! # $ % & ‘ ( ) * + , : ; / \ = @ ~ 1
Space 0
Q,q 7
Z,z 9
2. When the correct entry displays, press the Right Arrow key to move on to the
next character. Repeat for each digit/letter of the entry. To erase, press the Left
Arrow key or Bksp softkey to erase the previous character.
3. Press the Save softkey to save the entry and return to the menu.
Press the Cncl softkey to abort and return to the menu without saving any
changes.
The following table lists the Admin menu items. The default settings are shown
in the table below with an * prior to the option. Detailed descriptions of each
item appear below the table.